• 07 3293 1611
  • Office Hours: Mon - Thur: 8.30am - 2.30pm Fri: 8.30am - 12.30pm
  • sales@ntfa.com.au

SERVICE OVERVIEW

To ensure clear line accuracy on your sports timber floor, Non Toxic Floors Australia uses state of the art sanding machines, court line marking and coatings machines.
Our cutting edge equipment and technology show through in our line painting and coating of your timber sports floors. You’ll be amazed that your court lines will be so straight, accurate, crisp, smooth and without bleeds.

Our services include:

  • Complete sports floor restoration.
  • Total replacement or overlay systems.
  • Quality sanding of strip and parquetry timber sports floors.
  • Up to date line marking expertise.
  • Company logos can be placed onto the sports floors.
  • Daily maintenance procedures plus cleaning product including walk-off matting.

 

Sports timber floor courts we can do for you:

  • Basketball Courts
  • Netball Courts
  • Futsal Courts
  • Badminton Courts
  • Volleyball Courts
  • Wheel Chair Rugby Courts

Indoor Sports Floor Line Marking Sizes:

The width of the line for Basketball Court line marking 50mm, Netball Courts line marking 50mm, Futsal Courts line marking 50mm, Badminton Courts line marking 40mm, Volleyball Courts line marking 50mm,
Wheel Chair Rugby Courts line marking 50mm.

We also install new timber sports floors as well.

COSTS AND DETAILS

Costs are only a guide & can change at any time.
Supply, Install, Line Marking, Sanding & Polishing $109 - $450 Per Square Meter

WHY CHOOSE US

Our combined experience is well over 40 years and a real focus on customer satisfaction, you can rely on us for your next project. We provide a professional floor sanding and installation services with a real focus on customer satisfaction.

  • Responsibility to Our Clients
  • Superior Quality and Craftsmanship
  • Quality and Value to the Projects We Deliver
  • Highest Standards in Cost Control
  • On Time and on Budget
  • Real Focus on Customer Satisfaction

POPULAR QUESTIONS

  • How many coats do we apply and how long will it take?

    We apply three coats of low VOC polyurethane timber floor coating made by Enviro Floors – a base coat and then two top coats. The second coat will look a bit rough, we call that grain raising, so in preparation for the 3rd coat we lightly sand and vacuum ready for the application of 3rd coat. Drying time is approximately 4 to 8 hours per coat and you can move furniture back 24 – 48 hours after the last coat depending on the weather.
    All furniture must be lifted, rugs and mats can be placed onto the floor after 2 weeks. Put felt pads under all furniture.

  • Why are Polyurethane water based timber coatings better?

    Polyurethane water based timber finishes contain water instead of solvents and are therefore better for the environment, being low in VOCs (Volatile Organic Compounds) and easier to clean up. Brushes and other application equipment can be washed up in the water, whereas those used for solvent-based finishes need to be washed up in turpentine or thinners. Polyurethane water-based products are also quicker to dry, which often means you can apply all the coats required within one day.

  • What is the durability like?

    Maintaining and caring for such a valuable asset as your floor can make a substantial impact on how long it will look great for, and also how long it may be before a new refurbishment coat may be required.
    The durability of the coating on timber floors varies as to the amount of traffic and the bringing of outside grit into the house. These are a few handy tips to remember; it is always a good idea to have entrance matting at the door so that outside grit can be brushed off before entering the house. Removing outdoor shoes and only wearing indoor shoes inside helps to reduce surface scratches.

  • Maintaining your Polished timber floors

    Maintaining and caring for such a valuable asset as your floor can make a substantial impact on how long it will look great for, and also how long it may be before a new refurbishment coat may be required.
    Durability of the coating on timber floors varies as to the amount of traffic and the bringing of outside grit into the house.
    These are a few handy tips to remember; it is always a good idea to have entrance matting at the door so that outside grit can be brushed off before entering the house. Removing outdoor shoes and only wearing indoor shoes inside helps to reduce surface scratches.
    When it comes to wood, too much and too hot water is a no-no and can ruin your floors! Excessive wet patches can stain timber flooring and can even result in expanded and warped boards. The correct mop and mopping technique will prolong the life and beauty of your wooden floors, protecting your investment.
    A mop water solution that is! Many people recommend using just water and vinegar.
    If you care about your floors, don’t add anything harsh to the mop water like bleach or ammonia. Using a dedicated wood floor solution or just a little soap in the mop water will ensure dirt is better lifted and bring back that beautiful timber gleam.

© Copyright 2019 Non Toxic Floors Australia - NTFA