Call Now 32931611


Sanding Timber Deck Oil Coating Brisbane our company Non Toxic Floors Australia will service your timber deck sanding or verandah sanding or oil coating services or recoating services with Enviro-Deck low VOC coatings.

There is no smell and maintenance is low meaning that the lifetime cost of the product is reduced by a long way.


Timber decks or verandahs look great sanded and coated with our Enviro Floors exterior deck coating.
Remember though, that in our climate, most oil-based coatings are high in maintenance plus have a large carbon footprint which is not long-lasting and needs frequent re-coating.

Sitting out on a beautiful deck at night with just the evening glow across the sky falling on the timber deck or verandah that has been treated with an Enviro Floors coating will bring out the passion in the timber decking. After testing many different products we believe that the Non Toxic Floors Australia Enviro Floors decking system we use provides a long-lasting tough, durable and lustrous finish that protects the timber longer than ordinary finishes. This is because it has been developed to withstand the severe weather extremes of our subtropical climate.

The coating goes deep into the wood’s pores delivering superior adhesion to ensure maximum life and peel resistance, whilst the finish gives an attractive satin appearance. It resists moisture penetration and decay, providing exceptional UV protection against the sun’s harmful rays, thereby retarding the ageing of timber.

Good timber decking looks stylish, blends well with the environment and suits traditional as well as contemporary architecture. It is a quality product that will last a lifetime and is, therefore, excellent value for money. It is easy to look after with our non-toxic Enviro Floors coating.

Before applying Enviro Deck or Verandah finish to your timber deck or verandah we do adequate surface preparation. Just as you wouldn’t wax your sports car without thoroughly washing it first, you shouldn’t apply any sort of coating on a deck or verandah without adequate cleaning.

A timber deck needs regular maintenance, otherwise, it risks becoming discoloured and affected by moisture, weathering and disintegration.

How long does Enviro Deck (Verandah) last?
Depending on the amount of weather your deck or verandah receives and the type of product you’ve chosen to use, you should be looking to recoat every 6-18 months. Under ideal conditions, where the recommended preparation has been carried out, and the correct film thickness has been applied, Enviro Deck (Verandah) will last approximately 3 times longer than a traditional decking oil, depending on the degree of exposure of the timber to the elements (for example, a sheltered deck or verandah will last longer than a highly exposed beach house deck).

Enviro Deck (Verandah) is also a semi-transparent protective finish that not only penetrates into the timber but it also forms a protective coating on the surface for added protection. The tint helps to protect the timber from UV attack and will help maintain the timber colour for longer. Enviro Deck (Verandah) is ideal for using on new timber, timber that has retained its colour, or weathered timber whose colour can be revived by sanding back or by using Enviro Deck (Verandah) Wash.

What is the Ribbed part of the decking?
A ribbed part of the decking has which is carved into it along the length of the timber. The grooves may be on one or both sides of the timber. Originally, the ribbed part of the decking was designed to be laid downwards to allow air movement around the joists they were laid onto to help prevent rotting. However, the Ribbed part of the decking is often laid upwards as many believe they stop slipping. This is not the case as grooves trap water and encourage the growth of algae which makes the surface more slippery. Coatings applied to the Ribbed part of the deck have a shorter lifespan than those applied to the smooth, un-Ribbed part of the decks or verandah.

Can I use Enviro Deck (Verandah) over a deck that has been previously coated with an oil-based decking oil?
Yes, if the timber has weathered and lost all water repellency (test by seeing if water still beads on the surface). The timber should then be cleaned with Enviro Deck (Verandah) Wash and Enviro Deck (Verandah) applied. If the timber is water repellent, the deck or verandah can be left to weather further (until it no longer water beads) or it can be sanded back.

Can Enviro Deck use over DWD?
No. DWD must be thoroughly removed back to bare timber. A combination of Intergrain Liquid 8 Paint Remover and power washing, or sanding is recommended. Then clean all timber with Intergrain Reviva Timber Cleaner closely following label instructions. Ensure the surface is rinsed clean and allowed to thoroughly dry. Test if the surface is ready for coating by sprinkling water on the timber. If the water beads on the surface repeat the application of Enviro Deck Wash

Do I need to wait before coating my new deck or verandah?
If the timber is new then it is recommended that you wait approximately 4 to 6 weeks before preparing the deck or verandah with Enviro Deck Wash and then coating your deck or verandah with a decking Enviro Deck Coating. Tannin-rich and oily timbers may require longer. Timber is ready for coating when all the tannins and oils have leeched from the timber. To speed up the weathering process, wash the deck or verandah as often as possible which will assist the leaching process. Decking can be made from a range of timber, for example, Cypress Pine, Treated Pine, Blackbutt, Red or Grey Ironbark, White Mahogany, Spotted Gum, Tallow wood, Merbau, Kwila and Jarrah.

My deck or verandah has gone grey, do I have to stain it now to have a timber-coloured deck or verandah?
By using Enviro Deck Wash you can bring back the colour of the natural wood depending on the age of the timber. Enviro Deck Wash will remove dead grey fibres and any dirt, oils and tannins. Once the timber has dried, you’ll be able to apply Enviro Deck coating.

If I have sanded my deck or verandah (or any exterior timber) do I need to wash it with Enviro Deck Wash?
Yes, to ensure the timber is properly prepared for coating. When the timber is sanded the process draws out the natural oils that can sometimes create a waxy finish. This waxy finish can prevent the timber finishes from adhering properly. Washing with Enviro Deck Wash ensures that the timber is ready for coating.

How do I sand my deck or verandah if the screws are projecting above the timber surface?
Unfortunately, as screws cannot be punched in like nails, you will have to either remove or counter sink each screw.

Enviro Floors | Deck Recoating | Deck Sanding | Deck Coating

Free Quotes

Free Quotes at your home or at a job site – Professional Guaranteed Tradesman doing your quote. Once the deposit has been paid your job is locked into that date you asked for.


High-quality on dust control, hard-wearing & Australian made coatings used, sanding, polishing, coatings, and repairs. We will restore your timber or wooden floor or deck to make them look brand new again.


Family Owned operated business for 47 Years. Trusted and highly recommended & a member of Australasian Timber Flooring Association, QLD QBCC licensed.
Referrals from our previous customers and our clients come back 3 or 4 times over.


We are confident in our experience and expertise and with that, we stand by all of our work. All jobs that are completed have a 5 years workmanship warranty.
Great advice for aftercare floor maintenance while using Australian made products.


Safety is number one and the priority in our business is to make sure all of our customers are safe & well. Customers are required to show proof of testing for lead in all paints that are on timber floors. Plus check for asbestos in all felt carpet underlays, old vinyl backings, and old vinyl tiles.


Safety is our number one priority. Every time we implement floor installation, restoration, maintenance or aftercare jobs, we always make sure everything that is involved in the process is secured, protected and safe.

      Save $$$$$$$ on removalists & storage.
      Small jobs are completed in 1 ½ days. Medium jobs are completed in 2 ½ Days. Large houses can be done in two parts by putting furniture into other rooms that will be done in the next stage or do the whole house in 3 ½ days.
      Stay in your home & no need for those expensive hotel costs for up to three nights or more with accommodation & meals costs.
      No moving out saving you $400 – $600 in Accommodation & Meals.
      Our state of art floor sanding machines have extreme dust extraction systems on them which means that the dust from our special sanding process will not spread the dust all over the walls in your lovely home.
      Our skilled professional tradesmen are working on your job with a qualified trained apprentice.
      The coating we use lasts a very long time in commercial and domestic situations. We can re-coat your floors as well so you don’t have to resand them for at least 15 years or more saving you $$$$$ & Time.
      Why would you use a business that gives you no Warranty at least we give you a Warranty on 5 years workmanship.
      After the last coat of our has been applied to your timber floor it takes about 4-5 hours to dry (longer on rainy & cold days) so then you can walk on your floor in socks or bare feet. See no need to move out of your home so you can sleep there. The furniture can be moved back within 24 to 48 hours.

Before Floor Sanding Photo

Before floor sanding off black glue in Redcliffe Non Toxic Floors Australia

After Floor Sanding Photo

After floor sanding off black glue in Redcliffe Non Toxic Floors Australia
© Copyright 2024 Non Toxic Floors Australia works out of BRISBANE QLD- CALL NOW 32931611 - Email: QBCC Licence No: 746312
CALL US NOW 32931611